I have been working with my OpenSpot and have found that I am not consistently receiving audio to my MD-380.
I will miss the first few seconds of a conversation or miss just one side or at times, not hear anything at all. In every case, the OpenSpot is seeing the traffic in the call log and the Activity light is flashing, the modem light is flashing red and the Ethernet activity light is flashing.

The OpenSpot is 5 feet from my radio and is on high power.

The jitter queue is running between 12 and 22 packets. I cannot get the queue size below 560 milliseconds.

My status screen shows:
Status: standby
Active config profile: 0 (default)
Active connector: Homebrew/MMDVM
Modem mode: DMR/Hotspot
Modem RX/TX frequency, power: 446.100000/446.100000 100%
Server: primary
Homebrew call rerouting: not active
BrandMeister linked static TGs: -
BrandMeister linked dynamic TGs: 3100
BrandMeister linked reflector:
BrandMeister server:

I am connected to 3102.repeater.net port 62030
The TalkGroup selected is 3100
Send no in-band data to network is not selected
Send no in-band data to modem is not selected
Transmit idle in BS mode idle TX slot is selected (I assume this was the default)

My radio's selected channel has its Contact Name pointing to the Digital Contact for 3100
The channel has its Group List setting pointing to a Group List with a single Digital Contact for TG9 only
The color code is 1 and the repeater slot is 1 (as I understand it, the repeater slot does not matter for an OpenSpot).

Any advice would be greatly appreciated.
Thank you.