I set it up SharkRF and it works fine but with my ID-51A Plus2 I only can receive.
Radio is programmed at 436.000 MHz RX/TX simplex DV-Mode -> UR: CQCQCQ R1: empty R2: empty My: KE4HAI
Receiving: Works very well on the ID51, excellent audio and station information is displayed properly.
Transmit: When transmitting on my ID51 the confirmation beep is present after the transmission. All 4 LEDs blink green and when releasing the PTT the third one from the left shortly goes red.
Also on the Computer under
Status
the transmission shows up (KE4HAI). See screen shot.
However when using the SharkRF the voice signal is not going forward. This also is confirmed that I was not able to reach any station in my tests. Moreover when monitoring 30C on a second DStar Radio via the local repeater neither my call sign nor my voice is coming through
My call sign KE4HAI is registered and I do daily QSOs via our local repeater with my ID-5100 Radio.
So I'm wondering if some setting in my ID51 radio or SharkRF is wrong or if there is a problem with the IP address. (Using Frontier FIOS).
Any help is appreciated.