You can do the following:
- Download this file to your computer:
https://img.sharkrf.com/api/v1/images/agxlfnNoYXJrcmYtZndyEgsSBUltYWdlGICAgICZ54MKDA/blob
- Unplug the USB cable
- Press and hold the button
- Plug the USB cable
into the computer
while holding the button pressed
- Release the button
- A flash drive will appear on your computer called BOOTLOADER
- Copy the downloaded file to this flash drive
- The LED will start blinking alternating red/green for about 2 minutes. After that it should be steady green.
- The openSPOT2 will automatically reboot in 1 minute after the LED became steady green.
After this process the openSPOT2 will run as normal but as the v15 update contains a Wi-Fi firmware update it will first apply that which is indicated by blinking red/yellow LEDs for about 2 minutes.
I have been experiencing the red/yellow flashing non stop. I followed the procedure posted here and all went as described except it never stops flashing red/yellow after it reboots. Is there anything else I should be trying?