f1ptl
Hi,
Transmission impossible with YSFReflector (C4FM). it works with FCS. Version 15 firmware.
Is there a specific configuration for YSF?
73's
F1PTL Bruno
f1ptl
Hi,
The YSFReflector works on another OpenSpot but not on MMDVM_HS_Hat Dual. I do not know why ? Someone has the same problem ?
73's
HA2NON
Does the issue exist using another servers? Does the openSPOT2 connect to the server successfully?
f1ptl
The connection is good on the YSFReflector (YSF-France.fr) the reception of active stations ok when I go on the show with the OpenSpot2 I can not hear anything, no modulation, no signal on some equipment
DV-MEGA, MMDVM_HS_Hat. Only OpenSpot are active.
73's
Bruno
HA2NON
Do you see stations transmitting in the openSPOT2's call log on the status page?
Does the modem LED blink red when there's an ongoing transmission from the network?
Does your radio indicate any receiving?
f1ptl
Hi,
For C4FM/YSF
Waiting OpenSpot2 green led flashes slowly
In reception OpenSpot2 red led flashes quickly
Emitting OpenSpot2 led green flashing quickly
==> In C4FM FTM400 reception with a DVMega / RPI with PiStar YSF
==> Nothing, no signal at the radio
73's
F1PTL Bruno
HA2NON
Do you see stations transmitting in the openSPOT2's call log on the status page?
Does the openSPOT2's local echo service work with your radio? You can test it by setting the DGID to 99 in your radio.
Also please test the FCS network echo on room 99.
f1ptl
File log F1PTL transmit C4FM YSFReflector
F1PTL-log.7z
Do you see stations transmitting in the openSPOT2's call log on the status page? Yes
Does the openSPOT2's local echo service work with your radio? YSF Parrot
Also please test the FCS network echo on room 99.
The FCS system works well. Just the YSFReflector system.
Is the YSFReflector setting identical to the old OpenSpot? because I do not have any problem with the old one that I replace it by the new OpenSpot 2 the OM me m'endend on their montages MMDVM.
In reception on the OpenSpot2 no problem.
Sorry to insist because there is something. Have you been able to do a test?
73's
F1PTL Bruno
f1ptl
Other information:
When I broadcast on OpenSpot2 YSF on the FT2D radio that receives the led turns on and goes off without receiving my modulation.
73's
F1PTL Bruno
HA2NON
Please send us your exported configuration profile file to
info@sharkrf.com
and we'll check your settings. You can export the configuration profile file by clicking on the Export button on the Settings page.
Please refer to this forum thread in your email.
AE5JO
We're experiencing the same issue here with our YSF reflector. Users with legacy openSPOT can communicate with users that use pi-star devices but users with openSPOT2 can not. I can see in the reflector dashboard that the YSF is hearing the openSPOT2 user, and legacy openSPOT users can hear the OS2 user, but the pi-star driven MMDVM repeater that's connected to the reflector isn't picking up on the signal from the OS2 user.. just the OS1 user. For what it's worth, my pi-star dashboard picked up ONE transmission from an openSPOT2 when the user was first setting it up - in the spot on the dashboard where it would normally show the user's call sign it displayed "openSPOT2" so I assume the user hadn't set it up completely at the time. Perhaps there's a setting that's off? There are two different YSF users that have the openSPOT2 already (just received in the last couple days) and they are both running latest firmware and having the same issue. That's a thought... maybe the issue is with the latest firmware. It could be that it worked BEFORE the user updated the firmware to the latest version.
AE5JO
Sorry, more information - when an openSPOT2 user talks into the YSF, I AM seeing it on the pi-star dashboard but the device is not passing the signal. The MMDVM repeater keys up for about a second then drops even though the dash shows that it should be transmitting. Is there some embedded data that the openSPOT1 includes in the stream that's missing from the openSPOT2 that is needed to hold the connection open with MMDVM devices?
HA2NON
We'll check this on Monday. Thanks for the information!
f1ptl
Hi,
Another OM has kept the base version V013 of OpenSpot2, the YSFreflector is working properly.
73's
F1PTL Bruno
Bluenorthern
We are also having issues with the Open Spot2 connecting to the MMDVM while on the YSF network. When we put the OS1 back in line, the system communicates correctly with various devices. We support your products but wanted to confirm we have the same issue here in San Antonio, TX on our repeater network. Thanks! Doug N8IQT
KE8O
Were noticing the same thing here on Ohio Link with our only OpenSpot2 users. The interesting thing is I hear him fine in our WiresX room and the bridged Brandmeister DMR TG. Which both come in from YSF using a OpenSpot for our room.
73,
...Gary, KE8O
HA2NON
We tested it today with the latest version of YSFReflector and it works correctly between OS1 and OS2 devices in every configuration. We don't know why MMDVMs don't receive the calls, but we'll test it with an MMDVM as soon as one of our alpha testers will be online who has one.
HA2NON
We've tested it with MMDVM on several servers and we couldn't reproduce the issue. Please write us the server IP addresses which the issue can be reproduced with.
HA5OGR
I connected to Ohio link in three different ways. Wires-X = Ohio Link: 40557
YSF = Ohio Link: 48038, Brandmister: TG31399. The relationship between them back and forth worked perfectly. I had a successful contact with N8YMT. I hadn't found any issue in testing process.
KD8GRN
Hello, thanks for texting this, however it looks like you setup the ooenspot2 to connect to brandmeister and not ysf, so it will work fine. The problem is the openspot2 connected to ysf. Key up and you will hear the transmission fine on dmr, and wires, but year nothing on the mmdvm side also connected direct to ysf. I will be more then happy to get on the Ohio Link with you and my ooenspot2 if you want to test things out again.
73,
Geoff, KD8GRN