BaconRadio
I haven't had a lot of time to play with my new OpenSpot 2, but I did get it hooked up so I could try the local Parrot function. When I key up my radio (Anytone D868) it links up properly, but when I unkey I hear a weird warbling buzz for a quarter second or so. When my transmission is played back, it'll work fine for about a half second, drop carrier for a half second, and then continue. If I count to ten as a test, I'll hear "One" carrier drop "three, four, five..." Sometimes I'll simply hear nothing, then "three, four five..." I'll also hear that strange warbling buzz at the end of the OpenSpot's transmission.
I did a test where I transmitted on TAC 315 and listened on Hoseline, and the entire message came through. I haven't had a chance to set up any static talkgroups so I can hear when comes back through the OpenSpot 2, but getting out seems to work okay.
Any thoughts on what's going on? Thanks.
BaconRadio
That's correct. When I send a private call to 9999 I hear an odd warble/buzz when I unkey. The response has dropouts as well as the same warble/buzz when the device stops transmitting.
Calls to other TGs seem to go through fine as I can hear myself on Hoseline.
I'm happy to send audio/video if that helps.
Thanks.
EDIT: This is with the latest version of the firmware that the OpenSpot2 downloaded when I fired it up the first time (and rebooted).