WR2M
After spending hours trying to figure out why my Openspot2 would not pass inbound or outbound traffic while connected to Brandmeister, I have concluded that the Openspot2 is NOT compatible with my Connect Systems Portable CS710. My theory was proven after I borrowed a friends TYT MD380 because the TYT works issue free
This same Connect Systems Portable CS710 that didn't work with the OS2 works perfect with the original Openspot that I purchased during the Easter sale back in the spring. This same CSI portable also works perfect on the local repeaters, one of them is a Hytera and the other repeater is a Motorola SLR. The CSI 710 also works perfect when operating simplex "radio to radio" with both Motorola and Hytera portables. Lastly it also works perfect on a Zumspot that I currently use for NXDN and DMR.
Have any other CSI users experienced any issues ??
Thoughts ??
Thanks
73
Bill, WR2M
n1id
Yes. See my troubleshooting entry.
WR2M
Yes. See my troubleshooting entry.
Thanks for the heads up John, Im confident it will eventually be resolved..
73
Bill, WR2M
HA2NON
We'll buy a Connect Systems radio to find out what it's transmitting and to solve the issue.
WR2M
I emailed you regarding this isssue
M3SXA
We'll buy a Connect Systems radio to find out what it's transmitting and to solve the issue.
There’s quality support for you
👍🏻
WR2M
Any news on the Connect Systems compatibility issues yet ?
HA2NON
We have not received the radio yet. It's on it's way to us.
WR2M
I saw on another thread you identified the problem with the Connect Systems Radio. Please make Connect Systems aware that the CS710 also experiences the same issue as the cs800, cs800d and the cs750.
Thanks
HA2NON
As I wrote, "We notified Connect Systems about these issues with their radios, hopefully they will ask the radio developers to release a fixed firmware."
n1id
I just tried the latest OS2 beta workaround and all my csi radios now work
WR2M
Thanks for the heads up ! I'll now take the CSI out of mothballs
WR2M
Just tried my CSI Radio, the cs710 and it still does not work. I am on firmware v24..The cs710 still works on the local repeater and my Zumspot....Do I need to do anything on my end ?
HA2NON
What do you see in the log on the Status page when you press PTT on the radio?
Please test with the local echo on DMR ID 9999.