Hairbear1953
I just set up my Open Spot 2 today. It was working fine. So I went into the settings to add my two phones SSID/Password information. I did that and saved them to the Open Spot 2. After that the Open Spot stopped connecting to any device. I looked in my Router settings to see if it was there and connected to my router but it does not appear on the list. The Open Spot blinks blue and occasionally flashes red. If I key up my radio I see the Open Spot flash green for transmit, but it is not getting out. What has gone wrong? Is there a way to reset the Open Spot to go through the set up again? I have tried several things but cannot seem to get anything to work. Thanks for you help!
HA2NON
Blue LED means the openSPOT2 is trying to connect to the Wi-Fi network. The occasional red LED flash is the voice announcement that tells you the OS2 is trying to connect to the Wi-Fi network.
You can activate AP mode by pressing the button for 3 seconds. The LED will be pulsating white while the OS2 is in AP mode, and the "openSPOT2 AP" Wi-Fi network will appear. You can connect to it and set up the Wi-Fi connection again.
Make sure you enter the network key case-sensitive.