WILLG
What should the inner deviation be for C4FM using FTM-400XDR ON THE NEW SHARKRF openSPOT2?
W5GIF
HA2NON
If the radio has half deviation mode turned off, then 900Hz, if it's on then 450Hz.
GM7LSI Johnny
I don`t think the FTM-400XDR has the option for half deviation mode, if it has, I have not been able to find it. I have the option on my FT2D but not my FTM-400XDR.
PY4CK
Should we use half-deviation mode on Yaesu FT-2DR and OS2? In what this makes it better, if that is the case?
HA2NON
Half deviation should be turned off as the more narrower the signal is the harder is to demodulate it correctly. If you don't have the option to turn off half deviation then use the C4FM Half Deviation modem mode in the OS2.
WILLG
If the radio has half deviation mode turned off, then 900Hz, if it's on then 450Hz.
OK it was set to 900 by default, so i'm good there.
Now is there a way on the OS2 to get more mic gain/TX audio?
My FTM-400XDR is set to MAX and it's ok but not loud?
HA2NON
The openSPOT2 does not touch/reencode the audio stream, it is left intact. Only error correction is performed.
Try searching for a gain setting in your radio.
WILLG
I understand.
My TX Audio is set to MAX now:(
Thanks again for your time
73
W5GIF