Loading...
This site is best viewed in a modern browser with JavaScript enabled.
Something went wrong while trying to load the full version of this site. Try hard-refreshing this page to fix the error.
Cannot connect to web interface after firmware update
Kn4dnl
I updated the firmware today and I can establish Wi-Fi network in access point mode, but cannot open the web interface. Prior reflector etc still functioning.
moreychang
Please try to use
https://sharkrf.link
to access the web interface.
Sent from my iPhone using Tapatalk
Kn4dnl
It looks like the problem is my wi-fi network. I am using an Orbi ac3000 system with one satellite.
When I am in the room with the base, it works fine. When I try to use it when both devices are connected to the satellite, it does not. If I can figure it out, I will repost for others who may have the problem.
Kn4dnl
Problem was user error. The Orbi Wi-Fi satellite needed to be “re-synchronized “.
Don’t know why, but it now works fine using sharkrf link.
K3JRZ
I'm having the same issue after downloading v47. Rebooting my router, rebooted my computer. Tried the IP address of my OpenSPOT2, the sharkrf.link, and the openspot2.local url. Nothing.
The OS2 is pulsing green indicating that the openSPOT2 is connected to the selected server and is standing by. All I did was download the new firmware. My OpenSPOT2 was working before doing so.
The only thing I haven't tried yet was doing a factory reset on the OpenSPOT2.
UPDATE: I pulled the USB/power cable and held the button in while plugging the cable back in and that seems to have done the trick. Everything is still configured as before. WEIRD.