sshekels
Hi - I am trying to get a d74 to send commands to link to a reflector. No matter what one I choose it says "Openspot server not found". I have tried overriding DNS with the same results.
If I connect to a reflector (ref030C for instance) via the web interface to openspot it works fine and I can hear traffic, however when I chose Destination Select, Reflector, Link to Reflector, REF030CL from the D74 it fails with the message "Openspot server not found"
Any ideas?
Here is a relevant portion of the logs:
16:54:08 dstarcalltracker: voice call started, dst: REF030CL src: KA7GXP /D74 from modem: 1 id: cc0e6e4232bc2c3e
16:54:08 nvmm-csd: looking up callsign REF030CL
16:54:08 nvmm-csd: callsign REF030CL not found
16:54:08 nvmm-csd: looking up callsign KA7GXP
16:54:08 nvmm-csd: callsign KA7GXP not found
16:54:08 ref: got ping, replying
16:54:08 dstarcalltracker-sd: got msg Scott Orono, MN
16:54:08 dstarcalltracker-sd: got msg Scott Orono, MN
16:54:08 dstarcalltracker-sd: got msg Scott Orono, MN
16:54:08 dstarcalltracker-sd: got msg Scott Orono, MN
16:54:08 dstarcalltracker-sd: got msg Scott Orono, MN
16:54:08 dstarcalltracker-sd: got msg Scott Orono, MN
16:54:08 dstarcalltracker-sd: got msg Scott Orono, MN
and
16:54:10 modem-serveraddr-dl: looking up ref REF030
16:54:10 httpcln: error 403
16:54:10 spk: starting voice announcement
16:54:10 spk: requesting remote play: OSRQSVNF
thanks,
Scott
sshekels
Ok, so I figured this out. On my network I have 2 gateways. One is a Cisco ASA 5510 and one is a Watchguard T15. For some reason the Watchguard was blocking the traffic involved in changing reflectors.
If I move the Openspot to use the ASA it works just fine...
Hope that helps someone....
Scott