So I did this suggestion, it went as described, but it is still not working. Now what?
Hello,
Please do the following:
- Download this file to your computer:
https://img.sharkrf.com/api
( this address removed on purpose for this message in case it's not public)
- Turn off the openSPOT2 by unplugging the USB cable
- Press and hold the button
- Plug the USB cable into the computer while holding the button pressed
- Keep the button pressed for 1-2 seconds after the USB cable has been plugged in, then release it
- The LED will become yellow and a flash drive will appear on your computer called BOOTLOADER
- Copy the previously downloaded file to this BOOTLOADER drive
- The LED will start blinking alternating red/green for about 2-3 minutes. After that it should be steady green
- The openSPOT2 will automatically reboot in 1 minute after the LED became steady green, but now you can unplug it safely and then replug it to power on the openSPOT2. The Wi-Fi module firmware upgrade process will start which is indicated by red/yellow LED and it should take about 2-3 minutes. After that, the OS2 will start to operate.