NS8Q
I read in the manual that I need to enter * followed by the 5-digital reflector ID number to change from one Reflector to the next.
If I'm already connected to a YSF reflector via the hotspot, then how do I make the change using the radio? Do I need to disconnect from the reflector on the hotspot, then connect to it again using the Wires-X feature of the radio? I can connect to Wires-X without any problem.
73,
Chris NS8Q
HA2NON
You can both use DTMF codes and the Wires-X button on your transceiver to switch servers. You don't need to do a disconnect before you connect to a new server.
K8XG
The FT-70D does not have a Button called Wires-X or X like other radios.
Check the manual on how to connect to Wires-X repeaters and it will work the same on YSF reflectors.
IF I Recall correctly you press [Function] key then AMS button to get in the mode, then rotate the knob on top to get to the Direct Entry screen that starts with an * Then put in the 5 digit number like 64230 and press the AMS button again.
It is on page 30 of the FT-70DR user's manual. Art - K8XG