N8PDX
I am having issues with my OS2 and two separate MotoTRBO radios - an XPR4550 and an XPR6550. On both radios it is not uncommon for me to completely miss the full transmissions of stations on the Brandmeister network. For instance, I will be in a QSO with a station, finish my transmission, and then hear nothing. I know the other station is making it through the OS because the red LED is blinking and the green light on the radio flashes as if it is receiving a transmission, but no audio is heard over the speaker.
I have followed general online advice about programming MotoTRBO radios with the OS2 from online sources and used the "AutoCal" feature to sync the OS with my radios.
Possibly related is I am hearing a quick burst of digital "R2 D2" at the end of most transmissions and the radio is not giving the "roger" beep as it does when I use it on repeaters.
Thanks for the help!!
HA2NON
Make sure no in-band data gets sent to your transceiver. Go to the Settings page, DMR settings section, and verify that the "Send no in-band data to modem" setting is checked. Also make sure the TX power is set to 100% on the Modem page.
N8PDX
I have verified that no in band data is checked and tx power is 100%. I found another post in the forums referencing some issues with other hotspots. I wonder if that could be the issue?