Hello all! I have used my OpenSpot2 on D-Star a lot, but DMR is new to me. I recently acquired a Yaesu FY3D and would like to try out the C4FM to DRM capability on the OpenSpot2 but I cannot make it work.
I have registered for a DRM ID and have set up an account with Brandmiester. On the OpenSpot2 I went through the quick set up and made sure the modem mode was C4FM and used the BrandMiester manager to connect to a talk group. My radio is able to receive just fine and I can transmit to the OpenSpot (my call shows up in the status list), but my transmission never seems to make it to the DMR network. I have tried the Parrot talk group and never get my transmission repeated back. On 91, I have responded to lots of calls and never get and response, so clearly my transmission is not making it out. Any ideas? Here are a few screen shots of my settings:
Here is my call sign showing up in the status list:
https://www.dropbox.com/s/1vofwr1f02n8od3/Screen%20Shot%202020-05-19%20at%202.11.17%20PM.png?raw=1
Here are my connector settings:
https://www.dropbox.com/s/kb0ckgtjp8wfs56/Screen%20Shot%202020-05-19%20at%202.11.51%20PM.png?raw=1
And here are my DMR settings. Note that I have tried having both unchecking and checking the "Allow only IDs as cross mode callsigns" and didn't see any difference:
https://www.dropbox.com/s/6ieasthcaynsiwk/Screen%20Shot%202020-05-19%20at%202.12.10%20PM.png?raw=1