W7rjr My openspot2 has been working flawlessly until today. I have an ID5100A and an ID51A. I am normally able to change reflectors by switching memory channels. Today, I am getting the following verbal message "Openspot requested server not found". This occurs on both radios. Have reset the OS2, no help. When I change reflectors from the dashboard under "Connectors" all works correctly. Have connected OS2 to both home router and cellphone hotspot with same results. When I REBOOT the OS2 it shows that an upgrade is finishing up? When I press the upgrade button it says no new updates can be found? Any ideas on what might be going on? Thanks 73 W7RJR
W4KDK I am having the same trouble. It started happening this afternoon. Is yours working now? Mine isn’t.
W7rjr No, been driving me nuts. Have ruled out problem with radio as problem exists on both ID51a and ID 5100 with no changes having been made. Switched to hotspot on cell phone instead of home router with same problem. I am thinking this may be some kind of firmware issue that just developed. I reinitialized the OS2 and reconfigured everything, no success.
pa3rmm Same problem over here in the Netherlands. Requested server not found... I can not connect anymore with Dstar trough the Handheld commands. Sometime it works via the dashboard on the website. It started a few days ago... We got a problem.
pa3rmm All of them. What is weard is that this happens with the Handheld or any other radio. BUT on the dashbord its working well. Than I can connect to reflectors. But the commands of the handheld or my carradio suddenly are not accepted anymore towards the Hotspot. 3 Transmitters all the same problem ,.For now I work via the dashbord with a Laptop to connect to reflectors. Greetings from the Netherlands.
pa3rmm Tnx for the fast feedback. My openspot is 24/7 on and is using V75 formware. With regards. Michel pa3rmm
HA2NON Please post a device log excerpt which shows your server switch attempt from your radio. Make sure Advanced mode is turned on at the bottom right of the web interface so the device log can be seen.
GraemeLee HA2NON Was there a solution to this as its happened to me today. unable to connect...keep getting"Reqested Server not found" when I try switching reflectors on my ID52. thanks Graeme VK6MIL
pa3rmm Yesterday when I came home the OS2 was totally blocked. Nothing any-more worked. So the only thing to do was a full reset. Luckily I saved a year ago all the 5 profiles als back-up. Cost me 15 minutes to get all running and than all was well. HT also can made connection toward the OS2. I will never now what the problem was but Im happy that all is well again. Thanks For your response. Im always verry happy with the product. Michel pa3rmm '73
HA2NON Our server database had a networking issue, which is now fixed. It should work now, or in 1 day.
