DL5GNH
Dear Colleagues,
Please advice what else I could try to solve the issue
After connecting Open Spot 2 to the WiFi network successfully, I'm trying to access control interface via sharkrf.link. But nothing happening, the page is permanently loading. Tried from three devises, Mac, Android and Windows PC.
LED showing slow blinking green, same like when Open Spot is normally connected to YSF reflector
Thank you
HA2NON
- Make sure you are connected to the exact same Wi-Fi network with your browser device (phone/tablet/computer)
- Make sure Wi-Fi client isolation setting is turned off in your Wi-Fi router's configuration
n9exr66
While trying to use 192.168.43.99, dashboard never comes up on my Android/Verizon phone via HOTSPOT. This has been going on for over a month. What gives?!?!?
HA2NON
Please use sharkrf.link to open the web interface. Note that sharkrf.link will only work if your OS2 is connected to the configured Wi-Fi network (status LED is green or green/yellow).
n9exr66
Is this the CURRENT url-192.168.29.238, or is the old one defunct?
HA2NON
The IP address is assigned by your router automatically, and it may change, depending what your router decides. That's why we recommend using sharkrf.link to open the web interface.