k3llh
Hi.. any help would be appreciated..
..my openspot2 has worked great, connecting to any reflector that I wanted
and my signal reports have always been 5-9.. recentlly I find that I cannot
connect to 030C, the openspot just keeps repeating 'trying to connect' and
the status page which normally has the server address and status - "connected
to:" is blank along with NO server address. Note that the connector page
has the correct server address (45.79.43.161) and the 030C listing. I have tried
all that I know but cannot connect; I've connected to 029C and 032C in case
it was the digit (2 or 3) somehow affecting the connection. Any ideas would
be tried. tnx.. K3LLH
Tyrbiter
I've just been able to successfully connect to 30C myself, it seems that there is not an excessive number of simultaneous connections.
The only other thing I can think of is if you have accidentally connected twice simultaneously or perhaps some sort of accidental routing loop either of which can lead to a ban by either callsign or IP address.
You could try using a different network to see if that works, connecting via a cellular hotspot for instance if you normally use a home WiFi network.
If you have a callsign ban then from what I know these can be difficult to shift if the reflector admins don't want to be visible.
HTH.