Thomas
Hello to all.
Having issues setting up NXDN radio to work with openspot 2. Any suggestions are welcome.
Thanks
Thomas
Openspot 2 will not receive the transmit from radio.
Thomas
The radio is set to simplex TX/RX. Narrow band selected, RAN code none. The openspot is set to the correct frequency, NXDN mode, RAN code 0. The openspot won’t receive the radio transmit. Not sure how to sort it out.
Thanks for any help.
HA2NON
Please run NXDN AutoCal.
Thomas
I’ve tried auto/cal with no success. The radio can’t transmit to openspot or receive audio. Would you have any other suggestions.
Thanks,
HA2NON
Change both RX and TX frequencies and redo AutoCal, or manually adjust RX offset on the Modem page for the lowest BER. Test the connection with the local echo service on ID 9999.