CrossMode with some problems... ?!?

ApipApip

CrossMode with some problems... ?!?

Yet I struggle to understand and not to reverse the "new" names used in OpenSpot:
CONNECTOR and MODEM.

CONNECTOR = SERVER like: Connection to the server via the Internet
MODEM = TRANSCEIVER like: link to radio

DMR: MD380 TYTERA
C4FM: FT1D YAESU
OPENSPOT 1.1 / 36 CABLED or WIFI
INTERNET RJ to 1GBit/1GBit FTTH or LTE/4G via WIFI
CHECK audio/realtime to HoseLine and BM: http://hose.brandmeister.network/

Unfortunately I have tried several times but I can not figure out just how to receive.

How do I use my FT1D for example on DMR TG9990 PARROT?

How do I use my TYTmd380 on FCS001 / 99 PARROT?

I tried to configure OpenSpot connector of Homebrew and Modem over C4FM or/and DMR but nothing also passes by SWITCH to SELECTED and SAVE the various pages for CrossMode.

Unfortunately there is full information on the STATUS actual OpenSpot that would really be something pleasing to know if and how it is connected such that CONNECTOR MODEM and the connection status.

Thanks Hellp
73's

HA2NON

Ok, currently you can't do echo tests on TG9990 with a C4FM radio, as all traffic coming from a C4FM radio goes out on TG9 to DMR networks. We'll add a setting to the web interface so you can modify that. This feature has been already requested by others, so we'll add this feature very soon.

You can use FCS 99 parrot by connecting to FCS room 99, and talking on your DMR radio (don't forget to set your modem to DMR/Hotspot for cross-mode operation).

ApipApip

Thanks Norbert

Yes the TG9990 for DMR or the FCS099 as Parrot is only a TG/FSC exemple for explicate the availability to change TG or FCS room thrugh OpenSpot in CrossMode.

I'm waiting for the next update... I hope soon...
Thanks 73's