In another discussion, "FTM400 and Openspot4," LA9ULA mentioned that when using his FT3D and openSPOT4 crosslinked to multiple static DMR talkgroups, that the HT alternates the station call with the received talkgroup. I have an openSPOT4 Pro and an FT5D. In my case, the FT5D alternates between the station call, and "R>TG9." Do I have an incorrect openSPOT4 Pro configuration, or is this an FT5D issue?
I did see in the documentation that using mulitple talkgroups is not recommend, but as there is little traffic on any of them, it meets my needs. I use the DTMF # command to switch to the last active talkgroup, but it would be nice though not necessary to see it displayed.
Alan