Thank you Nobert.
Ended up finding an old router and using it as an AP last night. (TP-Link only 2.4GHz).
Both OpenSpot3's have been connected to the TP-Link for sevaral hours.
One is now connected still, for 10 hours.
Tried the "wrf 1" command on the other OpenSpot, and it's now cycling through the different WiFi SSID's I've configured in the OpenSpot.
Eventualy it connects to the TP-Link, then disconnects after 15-30 seconds and the cycle repeats itself.
The TP-Link router is set to Norway as a Regulatory Domain and so are the two OpenSpot3's.
The Zyxel AP is also set to Norway, did that when i did a factory reset, can however not see that in the GUI, it's probably disabled from the GUI like in some other Zyxel AP's.
So will have to look into that Zyxel AP a bit more
Here's the log frome one OpenSpot3 after the "wrf 1" command and a reboot:
--- Log File ---
a3k-receive: init ok
gs-uart: got invalid result, WLAN CONNECT ERROR expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #2
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RedWater"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #3
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "SeaWater"
batt: stat: charge/500mA, 97% (4044mV 31C est. 0h6m)
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #1
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RF_Link"
gs-uart: got invalid result, WLAN CONNECT ERROR expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #2
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RedWater"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #3
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "SeaWater"
batt: stat: charge/500mA, 97% (4044mV 31C est. 0h6m)
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #1
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RF_Link"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #2
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RedWater"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #3
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "SeaWater"
batt: stat: charge/500mA, 100% (new) (4092mV 31C est. 3h18m)
batt: switching on 5v0 mux
batt: setting current limit to 100mA
batt: stat: charge/100mA, 100% (4092mV 31C est. 3h18m)
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #1
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RF_Link"
nvmm: part CSD crc ok
nvmm-csd: valid header found
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #2
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RedWater"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #3
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "SeaWater"
batt: stat change: done/100mA, 100% (new) (4118mV 31C)
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #1
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RF_Link"
gs-uart: got invalid result, WLAN CONNECT ERROR expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #2
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RedWater"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #3
gs: init
batt: stat: done/100mA, 100% (new) (4122mV 31C)
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "SeaWater"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #1
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RF_Link"
batt: stat: done/100mA, 100% (new) (4118mV 31C)
gs-uart: got invalid result, WLAN CONNECT ERROR expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #2
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RedWater"
batt: stat: done/100mA, 100% (new) (4118mV 32C)
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #3
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "SeaWater"
gs-uart: got invalid result, SSID NOT FOUND expected: OK
gs: associate failed
gs-cmd: status parse error
net: using ssid #1
gs: init
gs: sdio init clk 1000000hz buswidth 4
gs: sdio init clk 1000000hz buswidth 4
gs: fwver 5.8.0 GS2K_BUILDER_27585
gs: regdom 1
gs: ap mac e8:2a:44😮S:03:82
gs: orig st mac e8:2a:44😮S:03:82 using e8:2a:44😮S:03:82
gs: associating to "RF_Link"
gs: associated to "RF_Link" (WIFI_MAC)
gs: set act. 1 (not act. en. 0)
net: enet link up, ap mode: 0, ip lease still valid: 0, last associated match: 0
net: need stack reinit
net: stack init
net: requesting addr with dhcp
net: bound to 192.168.1.82
net: llmnr server init ok (OS382 / 192.168.1.82)
net: mdns server init (OS382 / 192.168.1.82)
net: http server init
net: dhcp lease acquired
ntp: syncing at.pool.ntp.org (from dhcp server: 0)
nvmm: net ip report
batt: stat: done/100mA, 100% (new) (4118mV 32C)
net: at.pool.ntp.org resolve error, retrying
rtc: time set to 2023-08-14 10:25:00
net-connector: active deinit
net-connector: init homebrew
homebrew: init
homebrew: init (mmdvm proto: 0 mode: dmr)
configarea: no need to program profile sector 2
configarea: no need to program profile sector 2
homebrew: initializing connection
homebrew: using main server 185.51.76.16:62030 pass: BM_PASSWORD id: 0000094E
homebrew: connecting
homebrew: sending login
homebrew: sending auth
homebrew: auth ok
homebrew: sending config
homebrew: connected
httpcln: max. content length is 0, abort
nvmm: net ip address report retry 1/10
nvmm: downloading verinfo
httpcln: received 0 bytes (0% 0s)
httpcln: received 416 bytes (100% 0s)
nvmm: verinfo dl ok
nvmm: no new fw available
nvmm: net check
batt: stat: done/100mA, 100% (new) (4124mV 32C)
homebrew: ping sent
homebrew: pong received
nvmm: net check ok (139 ms)
nvmm: net ip report
homebrew: ping sent
homebrew: pong received
loghttpcln: max. content length is 0, abort
nvmm: net ip address report retry 2/10
batt: stat: done/100mA, 100% (new) (4114mV 32C)
--- Log File ---
Alex T./LA8IRA