REF 030C as 13003 and REF 001C as 10103 work fine as your example in your manual.
I tried REF 023C as 12303 and REF 091C as 19103 these do not work.
What am I doing wrong?
DStar Settings
Do you mean that the server does not connect, or the DTMF code does not work?
You can check what's happening by looking at the device log on the Status page (make sure Advanced mode is enabled to see the log).
I have solved it thanks, they have to be set to Private Call not Group Call.
Hello,
I'm having an issue connecting to my local Dstar repeater using my openSPOT4 Pro. When I first purchased the hotspot and set it up, it worked fine for accessing my local repeater WC4PEM. I use the gateway and module "B". I use the hotspot when I'm out of town to get into the repeater.
Here is my problem... I select FROM = opentSPOT 4, in My Call Signs I have WC4PEMBL, in TO = WC4PEMBL and then select use reflector. This has work for a long time to be able to talk to the people connected to the local RF repeater and also others attached via hotspot. Lately, when I key my radio using the openSPOT4, I can see it in the DPLUS Dashboard, but no keying of the repeater or audio. If I key up my other radio connected to the repeater by RF, I can hear it on the radio connected via hotspot, but not vice/versa.
Any help would be appreciated!
Dave
USB current limit:
1500mA
Hardware release:
1.0
Firmware version:
v55
Firmware built at:
Oct 26 2023 09:40:52 UTC
Bootloader ID:
CC218FE2
Device UID:
F111FCF6
Uptime:
00:52:31
Device time:
Please check the D-STAR radio setup section here: https://manuals.sharkrf.com/openspot4/en/setting-up-your-transceiver.html#d-star-radio-setup
- If you want to use a reflector, set the URCALL on your radio to CQCQCQ, and the local module on the openSPOT4 to D.
- If you want to use a gateway, set the URCALL on your radio to the gateway's callsign and remote module. The remote module should be the last character of the URCALL. Make sure you have registered your local module on the D-STARĀ® gateway registration system. If you have a registration, you have probably registered the "space" local module. In this case set your openSPOT4's local module to a space (empty) character.