My 500 will only connect to DMR in DN mode. I acutally was able to make a contact and both RX and TX audio was good (he said I was a trifle loud)...

On to the next protocol...

Thanks for everyone's help so far....

Wayne

BTW, I tried PTT+*+73099 (Release PTT) with zero effect.

People who cross mode do have to turn the audio down, its just how it is, not many know that or cant be bothered to do it, its really is annoying

Define please "turn the audio down". Is that a) mic gain, b) volume know on radio, or c) something else??

yeah mic gain, some people come through stupid loud and distorting doing that cross mode thing but no one tells them

Just had a successful QSO on P25 (10200). {Perfect audio)....

So I have:
DMR working (except automating from radio changing rooms)
YSF works (including changing rooms from radio)
P25 works (still need to figure automating from radio changing room)
DStar works still need to figure automating from radio changing room)

    Talking to a buddy of mine, it would seem you can manipulate groups/rooms only for your native system of your Radio.

    For me, since I have a Yaesu, its YSF. He is a ICOM man, so for him its DSTAR.

    Makes sense.

    Thanks for all who assissted!!!

    WSpivak Only way to automate changing DMR TGs is to set up Auto DTMF and write down which one goes to which TG. I have 1-3 set for changing OS profiles then 4 starts the TG list.

      WSpivak Yeah the mic buttons are totally flaky with OS4 and DTMF never gets processed correctly so best to just use the web page. If you are mobile then it's a challenge to change TGs unless you have a couple programmed as auto dtmf.

      micksmith Yeah sorry, looking at wrong notes. Too many new changes lately getting set up. DN required to connect to OS4.

        SkyKing No problem... I got everything to work, now I just need to find those groups that are active... another exercise, but one I can figure on my own...

        Thanks again!