OpenSpo4 Pro worked fine now does not.

stldeli

I have used it for a couple of years on different networks. It was green flashing for listening and red flashing for transmitting. It has worked fine on my current home network. I recently upgraded my DMR ID from "1" to "3". I changed the ID in the radio.
Now the OpenSpot4 is flashing Green/orange (I believe it is orange and not red) before I made the change in the radio. It continues after the change. I have reset the OpenSPot to confirm 2.4G connection to both the computer and the OpenSpot. I did a full reset of the OpenSpot and get the same results. My DMR ID update was done about 48 to 76 hours ago. I am running the interface on a MacBook Pro OS 15.3.1. Thoughts as to the change and in ability to connect?

HA2NON

Please see the meaning of Status LED colors in the user manual at https://manuals.sharkrf.com/openspot4/en/led-states.html#page-top

Green/orange Status LED means the openSPOT4 is connected to the Wi-Fi network and a special connector is active (ex. Null connector or AutoCal).

stldeli

I understand what the lights are indicating. I do not understand how to remove the "special connector". I do not understand how it just suddenly put itself into this mode. Can you advise how I reset it to remove the special connector condition? Thank you.

HA2NON

Use the Quick Setup on the web interface to set up a connection to a server, or activate a previously configured connector on the Connectors page.

If the Null connector is active then you've probably switched to it using a control call or the button method.