DAPNET/POGSAC not transmitting to pager any signal

OleksandrShyryayev

So openspot 4 pro not transmitting any signal to pager. Everything was very good configured and worked with WPSD. But openspot... Looks like receive messages and transmit to pager openspot 4 does very bad

HA2NON

Make sure you have enabled forwarding messages to POCSAG. Check the log for further details.

OleksandrShyryayev

Ok guys you need to fix software for DAPNET/POGSAC and messaging receiving (don’t know about all radios but AnyTone definitely). Because those features don’t work how they supposed to (if openspot 4 feel like sending received messages back to radio - great, but most of the time it didn’t, and there is no pattern for that, tried everything). It’s great killing feature to use DSTAR, but cheap MMDVM board with pi zero can do that with no problem!

OleksandrShyryayev

What I tried to say, messages and POGSAC don’t work how they do on Pi-STAR device, and that is definitely software problem

HA2NON

We have tested DAPNET message forwarding now and it works correctly with a Hytera PD785, a Motorola DM4600 and a Tyt MD380.

OleksandrShyryayev

Does it transmit to pager?

HA2NON

I assumed you meant forwarding DAPNET messages to a DMR transceiver.
Yes, the openSPOT4 can transmit DAPNET messages as POCSAG messages without any issues.

OleksandrShyryayev

To a pager or beeper, and no it cannot

Tyrbiter

You might give some detail, without it I doubt SharkRF can provide any support.

OleksandrShyryayev

I was not able to transmit on 439.9875 MHz to pager device mesages received from DAPNET

OleksandrShyryayev

I saw messages in openSPOT web dashboard but was not able to transmit to pager them

Tyrbiter

Can you post the log messages, there must be a reason it doesn't work but without knowing the contents of the pager message transmitted it will be difficult for SharkRF to determine what is happening.