k9bps I am unable to get my OS3 to update the call sign database. Tried end of last week. Yesterday I did a factory reset and tried again. I’ve tried it on my home wifi sitting next to the router. It’ll update partially and then start back over. It’s plugged into a USB adapter for power. (I have used more than one different usb cable and adapter). How can I get it to update?
HA2NON Please upgrade the device firmware manually, as the currently running firmware is probably too old for the auto upgrade. You can find the manual upgrade instructions in the user manual: https://manuals.sharkrf.com/openspot3/en/troubleshooting.html#i-want-to-manually-upgrade-the-firmware ("I want to manually upgrade the firmware" section)
k9bps I downloaded the firmware and installed it manually per the troubleshooting guide on your page. Now, it won’t work. I have an alternating red/blue slowly blinking light. (Two blinks red, two blue)
k9bps The lights finally cleared to green but it’s still in a loop trying to upload the call sign database. I’ve done a factory reset again as well
HA2NON Keep the device powered on overnight and it will eventually download the callsign-ID database.
Tyrbiter What firmware version does your OS3 have? I've got version 68 and it is showing callsign database 202601051143
k9bps Tyrbiter Firmware version 68. It’s trying to update to the callsign database that yours currently is at. It gets up to about 22% and starts over. I have had it plugged in for 1.5 to 2 weeks.
WI3J Enough of this topic. SharkRF,, just post a reply that the OS3 is no longer being supported for firmware and callsign database updates and close this thread.
Patrick Fired up my OPENSPOT3 the other day and it actually updated the database! It had not been updating for over 6 weeks! FYI
M8DCE Yes the Callsign database is updated monthly now, and I think you will find it updates around the first Monday of every Month. My OS2 sill updates so I am sure the OS3 will as well. 73 David M8DCE