The firmware upgrade is finalized if the device is running for at least 1 minute with the new firmware. If a reboot happens before 1 min. uptime then the device falls back to the previous valid firmware.

Wires-X button commands are only interpreted if they are coming from local RF. This can be disabled with the "Ignore Wires-X button commands" setting, which is useful if you use the openSPOT4 as a bridge from C4FM systems.

Thank you for the feedback! We are very happy that you like our products!

The destination callsign of the call contains a server ID of 40557 which is then looked up and switched to. Enable the "Ignore Wires-X button commands" setting on the Settings page, C4FM settings section if you do not want this. This setting is recommended if you are using the OS4 to bridg...

Moved the post from the openSPOT1 forum to the openSPOT3 forum. Please see the description of LED states in the user manual at https://manuals.sharkrf.com/openspot3/en/led-states.html#page-top Blue and orange status LED means: openSPOT3 is connected to the Wi-Fi network and trying to connect to the ...

Please describe what server/network do you want to talk on with your DMR transceiver. Please note that there's no "connection" between the transceiver and the openSPOT4 - if your transceiver receives a voice stream from the openSPOT4, then it opens the squelch if the destination talkgroup ...

Based on your first post in this thread, you want to talk on a YSFReflector server using your DMR transceiver. In this case, you need to set the TX contact to TG9 on your DMR transceiver, so your calls will be sent to TG9 and you'll receive calls from the YSFReflector server on TG9. TG91 is the worl...

It is mentioned in the user manual on this page: https://manuals.sharkrf.com/openspot4/e ... s-settings (Wireless settings section) that up to 5 Wi-Fi networks can be defined if you enable Advanced mode.

Please contact sales at info@sharkrf.com for information about refunds and returns.

Thank you for pointing it out, we'll remove it.