Search found 5990 matches

by HA2NON
Sun Jul 25, 2021 7:25 am
Forum: Troubleshooting
Topic: Works on OS3 won't work on OS2
Replies: 2
Views: 38

Re: Works on OS3 won't work on OS2

Please run DMR AutoCal, or manually adjust the RX offset on the Modem page for the lowest BER.
by HA2NON
Sun Jul 25, 2021 7:24 am
Forum: Troubleshooting
Topic: DMR Plus talkgroup issues
Replies: 1
Views: 29

Re: DMR Plus talkgroup issues

Please read http://manuals.sharkrf.com/openspot3/en ... l#page-top

"Talkgroups and reflectors are network features, they are completely handled by the network and not the openSPOT3, and their behavior may be different on each network."
by HA2NON
Sun Jul 25, 2021 7:23 am
Forum: Troubleshooting
Topic: Power ON Problem Running on the Battery
Replies: 4
Views: 69

Re: Power ON Problem Running on the Battery

Can you turn off the unit with the power button?
Is the device running the latest firmware? (v55)
by HA2NON
Sat Jul 24, 2021 7:58 am
Forum: Troubleshooting
Topic: os2 wifi questions
Replies: 2
Views: 33

Re: os2 wifi questions

- Place the openSPOT2 close to the Wi-Fi router. - Make sure the Wi-Fi bandwith is set to max. 20Mhz in the Wi-Fi router (see explanation here: https://superuser.com/questions/542191/does-moving-my-router-from-20mhz-to-40-mhz-increase-my-wireless-speed) - If it still does not work, try switching Wi-...
by HA2NON
Sat Jul 24, 2021 7:57 am
Forum: Troubleshooting
Topic: Color Code Mismatch
Replies: 2
Views: 39

Re: Color Code Mismatch

Please run DMR AutoCal, or manually adjust the RX offset on the Modem page for the lowest BER.
by HA2NON
Sat Jul 24, 2021 7:56 am
Forum: Troubleshooting
Topic: Power ON Problem Running on the Battery
Replies: 4
Views: 69

Re: Power ON Problem Running on the Battery

What happens if you power on the unit while it's connected, then unplug the USB cable?
by HA2NON
Thu Jul 22, 2021 7:49 am
Forum: Troubleshooting
Topic: cross mode with my dmR radio?
Replies: 1
Views: 39

Re: cross mode with my dmR radio?

For switching D-STAR servers using a DMR transceiver please see the "Cross mode usage" section on this page: http://manuals.sharkrf.com/openspot3/en ... l#page-top

YSFReflector and FCS server switching are also described on their user manual pages.
by HA2NON
Mon Jul 19, 2021 6:51 am
Forum: Troubleshooting
Topic: APRS Location
Replies: 1
Views: 45

Re: APRS Location

Please look at the device log on the Status page for more information about the decoding. Make sure Advanced mode is enabled at the bottom right of the web interface to see the device log. Your transceiver embeds location data in the voice stream of DN mode voice calls.
by HA2NON
Mon Jul 19, 2021 6:37 am
Forum: Troubleshooting
Topic: Openspot 3
Replies: 1
Views: 58

Re: Openspot 3

It's much easier to connect the OS3 to your home Wi-Fi network first, open the web interface and then set up the mobile hotspot's SSID and key. Go to the Network page, Wireless settings section on the OS3 web interface. Make sure Advanced mode is turned on (there's a checkbox for that at the bottom ...
by HA2NON
Sat Jul 17, 2021 8:24 am
Forum: Troubleshooting
Topic: C4FM to DStar Inconsistency
Replies: 26
Views: 437

Re: C4FM to DStar Inconsistency

Do you have C4FM Half Deviation disabled or enabled on your transceiver? If you have it enable, disable it. If there's no such setting on the transceiver, then make sure the openSPOT3 is using C4FM Half Deviation modem mode, and run C4FM Half Deviation AutoCal, or manually adjust the RX offset in +-...