SharkRF IP Connector Protocol server

Post Reply
VA3JCD
Posts: 16
Joined: Thu Jan 10, 2019 9:07 pm

SharkRF IP Connector Protocol server

Post by VA3JCD » Fri Jan 11, 2019 6:45 pm

Can we change the default port number from 80 to 8080, if so how.
Thanks. :D

User avatar
vocoder
Posts: 41
Joined: Wed Sep 14, 2016 2:59 am
Location: Merica

Re: SharkRF IP Connector Protocol server

Post by vocoder » Fri Jan 11, 2019 9:59 pm

You would need to make that change in your web server configuration. Which web server are you running the SharkRF IP Connector server on? Apache? NGINX? Something else?

VA3JCD
Posts: 16
Joined: Thu Jan 10, 2019 9:07 pm

Re: SharkRF IP Connector Protocol server

Post by VA3JCD » Sat Jan 12, 2019 7:41 pm

Will be using Apache.
Thanks.

User avatar
vocoder
Posts: 41
Joined: Wed Sep 14, 2016 2:59 am
Location: Merica

Re: SharkRF IP Connector Protocol server

Post by vocoder » Sat Jan 12, 2019 9:23 pm

Check out this link . It covers Debian/Ubuntu and RHEL/CentOS distros. In their example they're using "vi". I would recommend using "nano" instead.

VA3JCD
Posts: 16
Joined: Thu Jan 10, 2019 9:07 pm

Re: SharkRF IP Connector Protocol server

Post by VA3JCD » Wed Jan 16, 2019 7:28 pm

Thanks its working perfect.
Cliff

VA3JCD
Posts: 16
Joined: Thu Jan 10, 2019 9:07 pm

Re: SharkRF IP Connector Protocol server

Post by VA3JCD » Wed Jan 16, 2019 10:59 pm

Can you please add the following to the CPS:
IP Address
Talkgroup #
Capture.PNG
Capture.PNG (5.7 KiB) Viewed 36 times

Post Reply