NXDN radio

Post Reply
Thomas
Posts: 13
Joined: Sat Jan 26, 2019 6:47 pm

NXDN radio

Post by Thomas »

Hello to all.
Having issues setting up NXDN radio to work with openspot 2. Any suggestions are welcome.

Thanks
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 6121
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: NXDN radio

Post by HA2NON »

What is your issue?
Have you read the NXDN radio setup section at http://manuals.sharkrf.com/openspot2/en ... adio-setup ?
Norbert Varga, HA2NON
SharkRF Team
Thomas
Posts: 13
Joined: Sat Jan 26, 2019 6:47 pm

Re: NXDN radio

Post by Thomas »

Openspot 2 will not receive the transmit from radio.
Thomas
Posts: 13
Joined: Sat Jan 26, 2019 6:47 pm

Re: NXDN radio

Post by Thomas »

The radio is set to simplex TX/RX. Narrow band selected, RAN code none. The openspot is set to the correct frequency, NXDN mode, RAN code 0. The openspot won’t receive the radio transmit. Not sure how to sort it out.

Thanks for any help.
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 6121
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: NXDN radio

Post by HA2NON »

Please run NXDN AutoCal.
Norbert Varga, HA2NON
SharkRF Team
Thomas
Posts: 13
Joined: Sat Jan 26, 2019 6:47 pm

Re: NXDN radio

Post by Thomas »

I’ve tried auto/cal with no success. The radio can’t transmit to openspot or receive audio. Would you have any other suggestions.

Thanks,
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 6121
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: NXDN radio

Post by HA2NON »

Change both RX and TX frequencies and redo AutoCal, or manually adjust RX offset on the Modem page for the lowest BER. Test the connection with the local echo service on ID 9999.
Norbert Varga, HA2NON
SharkRF Team
Post Reply