OPENSPOT 2 is dead

crocky
Posts: 9
Joined: Tue Oct 30, 2018 10:55 am

Re: OPENSPOT 2 is dead

Post by crocky »

similar thing... V17 to V18 upgrade and it gets to V18 and says manually put the address in after it reboots and it does not come on.

Remove the power and put it back on and Sharkrf.link finds it but the upgrade has not been succesful, still at V17.

Tried it twice....

I have pressed the reset for 30 seconds and I have reloaded the openspot2 and at present it is once again saying its going to upgrade to V18...?
Bob, VK3CDE
crocky
Posts: 9
Joined: Tue Oct 30, 2018 10:55 am

Re: OPENSPOT 2 is dead

Post by crocky »

Tried pressing the switch and nothing?

Take power off the openspot2 and reapply and it still says that there is version 18 to be upgraded at 0400 hours in the morning... It will probably greet me as it did this morning no lights on and appears to be dead...

Windows 10 machine and everything worked properly up to V17...
Bob, VK3CDE
User avatar
HA5OGR
Posts: 544
Joined: Sat Mar 26, 2016 7:32 pm
Location: Dunavarsány
Contact:

Re: OPENSPOT 2 is dead

Post by HA5OGR »

Strange. This morning I woke up and looked at the Openspot2 status page. I saw that it was automatically upgraded to version 18. I did not do anything. Windows 10 home software runs on my computer.
Attachments
OS2 fw version.jpg
Windows 10.jpg
73 de Lajos
Openspot alpha tester
Image
xe1dvi
Posts: 1
Joined: Sat Mar 31, 2018 4:20 pm

Re: OPENSPOT 2 is dead

Post by xe1dvi »

Mine went dead while updating bootloader....

I've done everything to bring it back but, nothing will make the LED light up.

Tried connecting it to a computer, 30 sec button reset, but not LED light any color at all, please advise, thanks
User avatar
HA5OGR
Posts: 544
Joined: Sat Mar 26, 2016 7:32 pm
Location: Dunavarsány
Contact:

Re: OPENSPOT 2 is dead

Post by HA5OGR »

I sent you an email Reynaldo. Please check it!
73 de Lajos
Openspot alpha tester
Image
Summicron
Posts: 10
Joined: Sun Nov 11, 2018 7:07 pm

Re: OPENSPOT 2 is dead

Post by Summicron »

I went thru the process of the Bootloader and the red and green lights flashed for a while and then stopped. Now I try to run the program for the first time and all I get is a screen with...


openSpot 2 info
Hardware vesion
Firmware version
Callsign database version
Bootloader version
Device ID
USB data
Uptime
Device time:


All these have no data after these words
It stays on that screen and I can't push any buttons to get out of it. Only "Cancel" in the upper right Iphone corner

Also I tried Shark Link on my laptop and I get a network error after it asks me to input my UID number

Jim
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5393
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: OPENSPOT 2 is dead

Post by HA2NON »

Have you tried a full page reload? Or opening the web interface in Chrome or Safari (not the auto login browser which pops up when you connect to the openSPOT2 AP when it's in AP mode).
Norbert Varga, HA2NON
SharkRF Team
Summicron
Posts: 10
Joined: Sun Nov 11, 2018 7:07 pm

Re: OPENSPOT 2 is dead

Post by Summicron »

Tried it also in Chrome on my laptop and the same comes up.

Jim
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5393
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: OPENSPOT 2 is dead

Post by HA2NON »

Is your OS2 running in client mode or in AP mode?
Norbert Varga, HA2NON
SharkRF Team
Summicron
Posts: 10
Joined: Sun Nov 11, 2018 7:07 pm

Re: OPENSPOT 2 is dead

Post by Summicron »

I have tried this in both modes. I think the only way my iphone sees my OS2 is running it in AP mode. Eventually it will find "openSPOT2 AP" and then it take a minute or two to open the OS2 browser and gives me the screen of all I have written of in a previous email. I have to hit "cancel" in the upper right screen corner to exit.

JIm
Post Reply