Not receiving TG235 Phoenix while monitoring

Post Reply
G7JAC
Posts: 2
Joined: Wed Jan 09, 2019 8:36 pm

Not receiving TG235 Phoenix while monitoring

Post by G7JAC » Wed Jan 09, 2019 8:47 pm

Hi All,
New DMR and open spot user here... I'm connected to the Phoenix-F server and I can fire up TG's and talk to people but when sitting there just listening to TG235, the status says connected, I see users using TG235 in the live monitor but I cannot hear them and the OS2 is sitting there idle(Green throbbing LED) not transmitting to my radio. Almost like there is a timeout limiting the duration of the monitoring of the TG235... I chose TG235 for this as it is always one on my local repeater and I expected it to be the same on the OS2..

Any ideas, as I have been pouring over the user guide and nothing is jumping out at me.

Regards
John G7JAC
Regards
John (G7JAC)

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4072
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Not receiving TG235 Phoenix while monitoring

Post by HA2NON » Thu Jan 10, 2019 7:04 am

Does setting TG235 as static to keep it always connected helps? Turn on DMRplus options at the bottom of the Homebrew/MMDVM settings page to show the static TG list and add it there.

Please keep in mind that talkgroup/reflector linking/unlinking is handled by the network, not the OS2.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

G7JAC
Posts: 2
Joined: Wed Jan 09, 2019 8:36 pm

Re: Not receiving TG235 Phoenix while monitoring

Post by G7JAC » Thu Jan 10, 2019 9:03 pm

Hi,
Thanks for the response. I set 235 as a static as you suggested and it does indeed appear to have worked so far. Thanks for the information.
Regards
John (G7JAC)

Post Reply