Hi All.
I have had my OP2 for several months, and it have always worked as it should. I mainly use it in my car, connected to my iPhone, and sometime from home connected to my Huawei B525S LTE router. Yesterday I bought a mobile LTE router for my car, a Huawei E5885, which is capable of running both 5 and 2.4 Ghz as the B525 also is. But I can't get the OP2 to connect to it. I know OP2 is only 2.4 GHz, and even if I set the E5885 to only running in 2.4 GHz mode and channel 11, it is imposible to connect to it. Other devices, as my laptop and iPad has no problem connect to it, but the OP2 don't. I can see that it is actually connecting, and then disconnecting in an endless loop. I have seen in the past that a lot of people is having wireless trouble with the OP2, and always thought, that they must be doing something wrong. But now I can join these people.
WiFi problem with Huawei E5885
Re: WiFi problem with Huawei E5885
Make sure you enter the password case sensitive. Make sure the router's support for 802.11n is turned on, not just 802.11ac. Try switching the 2.4GHz Wi-Fi channel on the router. Also you should try with the latest beta firmware of the openSPOT2 (which will become stable next week).
Norbert Varga, HA2NON
SharkRF Team
SharkRF Team
Re: WiFi problem with Huawei E5885
Hi HA2NON
I have tried all your suggestions with no luck. I'm also running latest beta firmware.
As I wrote the strange thing is, that other devices is fully capable to connect to the router on 2.4 Ghz.
And the other funny thing is, that the OP2 actually connects, and then disconnects, in an endless loop.
I can se it on the Danish DMR Dashboard.
Regards
Kim
I have tried all your suggestions with no luck. I'm also running latest beta firmware.
As I wrote the strange thing is, that other devices is fully capable to connect to the router on 2.4 Ghz.
And the other funny thing is, that the OP2 actually connects, and then disconnects, in an endless loop.
I can se it on the Danish DMR Dashboard.
Regards
Kim
Re: WiFi problem with Huawei E5885
Are you sure the openSPOT2 disconnects from the Wi-Fi network? Open it's web interface and check the log. Also check the LED colors.
Norbert Varga, HA2NON
SharkRF Team
SharkRF Team
Re: WiFi problem with Huawei E5885
Hi HA2NON.
Yes I'm pretty sure that's what happens. When it disconnects, I got the message from my radio: "Trying to connect WiFi", or something similar. I'm at work right now, so the message is after my memory.
I will later on check the logs and LED.
Regards
Kim Larsen
Yes I'm pretty sure that's what happens. When it disconnects, I got the message from my radio: "Trying to connect WiFi", or something similar. I'm at work right now, so the message is after my memory.
I will later on check the logs and LED.
Regards
Kim Larsen
Re: WiFi problem with Huawei E5885
Hi HA2NON
I have tried to connect to the Huawei E5885 again, and still don't succeed. This time OP2 actually stays connected, but as I see it, it have some problem to resolve adresses. I have also tried to override DNS adresses in the network configuration with the DNS server from Google. Still same error. I can't either connect to the OP2's web interface, when I'm connected to the Huawei, and yes I'm here trying from a laptop also connected to the same WLan. I have tried to connect other devices, which is only capable of running 2.4 GHz, and they are working. The log attached are captured from the Serial console, as I can't take it from the Web interface. I did that, that I initiated a wireless scan, and tried to connect to the Huawei, which SSID is CHotspot2.4. At the end I did a NET, so you can see that I'm actually connected.
Hope you can see something from the attached log file.
73 de OZ9KL
sercon: inf: SharkRF openSPOT2 (openspot2)
SRF-OSW-1.0 dk v0035 F93F2150 up 137 wl 5.7.2 GS2K_BUILDER_27025
diag 0,00000030,00000004,00000033,00000030,00000029,0000002b,00000031
ready.
log
sercon: log on
nvmm: net check
nvmm: net check ok (301 ms)
configarea: storing profile sector 4
configarea: storing profile sector 0
configarea: storing profile sector 1
configarea: storing profile sector 2
configarea: storing profile sector 3
gs: reassociating
httpsrv[0]: websocket closed
gs: disassociated from "" (00:00:00:00:00:00)
net: enet link down
net: using ssid #1
gs: reinit needed before assoc
gs: init
gs: sdio init clk 30000000hz buswidth 4
gs: sdio init clk 30000000hz buswidth 4
gs: fwver 5.7.2 GS2K_BUILDER_27025
gs: regdom 1
gs: ap mac 3c:a0:67:58:6d:8c
gs: orig st mac 3c:a0:67:58:6d:8b using 3c:a0:67:58:6d:8b
gs: associating to "CHotspot2.4"
gs: associated to "CHotspot2.4" (0c:2c:54:21:8a:9b)
gs: set act. 1 (not act. en. 0)
net: enet link up, ap mode: 0, ip lease still valid: 1, last associated match: ssid: 0 bssid: 0
net: need stack reinit
net: stack deinit
net: connectors deinit
null: task terminating
net: mdns server deinit
net: llmnr server released
net: http server deinit
net: stack init
net: requesting addr with dhcp
net: bound to 192.168.8.101
syslog: init
nvmm: net ip report
syslog: getaddrinfo err
syslog: getaddrinfo err
syslog: getaddrinfo err
syslog: getaddrinfo err
syslog: getaddrinfo err
net: llmnr server init ok (openspot2 / 192.168.8.101)
net: mdns server init (openspot2 / 192.168.8.101)
net: http server init
httpcln error: ssl connect
net: dhcp lease acquired
net: connectors deinit
net: init null
null: init (mode: idle)
nvmm: net ip address report retry 1/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check retry 1/2
nvmm: net ip report
httpcln: sharkrf.link resolve error
nvmm: net ip address report retry 2/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check failed
nvmm: net ip report
httpcln: sharkrf.link resolve error
nvmm: net ip address report retry 3/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check retry 1/2
nvmm: net ip report
httpcln: sharkrf.link resolve error
nvmm: net ip address report retry 4/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check failed
log
sercon: log off
net
sercon: net config
hostname: openspot2
regdom: 1
mac: 3C:A0:67:58:6D:8B (orig: 3C:A0:67:58:6D:8B)
ap ssid: openSPOT2 AP (3C:A0:67:58:6D:8C ch11)
ap key:
ap mode: 0
pwrsaving: 0
ssid1: CHotspot2.4 (00:00:00:00:00:00)
key1: amigamig
act ssid: CHotspot2.4 (0C:2C:54:21:8A:9B ch6 -60dBm)
ip mode: dhcp
act ip: 192.168.8.101 (link up)
mask: 255.255.255.0
gw: 192.168.8.1
dns1: 192.168.8.1
dns2: 0.0.0.0
I have tried to connect to the Huawei E5885 again, and still don't succeed. This time OP2 actually stays connected, but as I see it, it have some problem to resolve adresses. I have also tried to override DNS adresses in the network configuration with the DNS server from Google. Still same error. I can't either connect to the OP2's web interface, when I'm connected to the Huawei, and yes I'm here trying from a laptop also connected to the same WLan. I have tried to connect other devices, which is only capable of running 2.4 GHz, and they are working. The log attached are captured from the Serial console, as I can't take it from the Web interface. I did that, that I initiated a wireless scan, and tried to connect to the Huawei, which SSID is CHotspot2.4. At the end I did a NET, so you can see that I'm actually connected.
Hope you can see something from the attached log file.
73 de OZ9KL
sercon: inf: SharkRF openSPOT2 (openspot2)
SRF-OSW-1.0 dk v0035 F93F2150 up 137 wl 5.7.2 GS2K_BUILDER_27025
diag 0,00000030,00000004,00000033,00000030,00000029,0000002b,00000031
ready.
log
sercon: log on
nvmm: net check
nvmm: net check ok (301 ms)
configarea: storing profile sector 4
configarea: storing profile sector 0
configarea: storing profile sector 1
configarea: storing profile sector 2
configarea: storing profile sector 3
gs: reassociating
httpsrv[0]: websocket closed
gs: disassociated from "" (00:00:00:00:00:00)
net: enet link down
net: using ssid #1
gs: reinit needed before assoc
gs: init
gs: sdio init clk 30000000hz buswidth 4
gs: sdio init clk 30000000hz buswidth 4
gs: fwver 5.7.2 GS2K_BUILDER_27025
gs: regdom 1
gs: ap mac 3c:a0:67:58:6d:8c
gs: orig st mac 3c:a0:67:58:6d:8b using 3c:a0:67:58:6d:8b
gs: associating to "CHotspot2.4"
gs: associated to "CHotspot2.4" (0c:2c:54:21:8a:9b)
gs: set act. 1 (not act. en. 0)
net: enet link up, ap mode: 0, ip lease still valid: 1, last associated match: ssid: 0 bssid: 0
net: need stack reinit
net: stack deinit
net: connectors deinit
null: task terminating
net: mdns server deinit
net: llmnr server released
net: http server deinit
net: stack init
net: requesting addr with dhcp
net: bound to 192.168.8.101
syslog: init
nvmm: net ip report
syslog: getaddrinfo err
syslog: getaddrinfo err
syslog: getaddrinfo err
syslog: getaddrinfo err
syslog: getaddrinfo err
net: llmnr server init ok (openspot2 / 192.168.8.101)
net: mdns server init (openspot2 / 192.168.8.101)
net: http server init
httpcln error: ssl connect
net: dhcp lease acquired
net: connectors deinit
net: init null
null: init (mode: idle)
nvmm: net ip address report retry 1/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check retry 1/2
nvmm: net ip report
httpcln: sharkrf.link resolve error
nvmm: net ip address report retry 2/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check failed
nvmm: net ip report
httpcln: sharkrf.link resolve error
nvmm: net ip address report retry 3/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check retry 1/2
nvmm: net ip report
httpcln: sharkrf.link resolve error
nvmm: net ip address report retry 4/10
nvmm: net check
httpcln: connectivitycheck.gstatic.com resolve error
nvmm: net check failed
log
sercon: log off
net
sercon: net config
hostname: openspot2
regdom: 1
mac: 3C:A0:67:58:6D:8B (orig: 3C:A0:67:58:6D:8B)
ap ssid: openSPOT2 AP (3C:A0:67:58:6D:8C ch11)
ap key:
ap mode: 0
pwrsaving: 0
ssid1: CHotspot2.4 (00:00:00:00:00:00)
key1: amigamig
act ssid: CHotspot2.4 (0C:2C:54:21:8A:9B ch6 -60dBm)
ip mode: dhcp
act ip: 192.168.8.101 (link up)
mask: 255.255.255.0
gw: 192.168.8.1
dns1: 192.168.8.1
dns2: 0.0.0.0
Re: WiFi problem with Huawei E5885
Make sure Wi-Fi client isolation is turned off in the router. Log shows no errors except the DNS server is not responding.
Norbert Varga, HA2NON
SharkRF Team
SharkRF Team
Re: WiFi problem with Huawei E5885
It is turned off.
Please note, that I can't connect to the web interface, even if I try to connect direct to the OP2 IP address 192.168.8.101. This has nothing to do with DNS.
OZ9KL
Please note, that I can't connect to the web interface, even if I try to connect direct to the OP2 IP address 192.168.8.101. This has nothing to do with DNS.
OZ9KL
Re: WiFi problem with Huawei E5885
What LED color do you have?
Do you use sharkrf.link?
Do you use sharkrf.link?
Norbert Varga, HA2NON
SharkRF Team
SharkRF Team
Re: WiFi problem with Huawei E5885
I have problem with the same Huawei hotspot. With my Samsung Galaxy S10 in hotspot mode there is no problem, but with the Huawei Hotspot that's never work, the openspot2 is connected to the wifi network, but don't find internet connexion, even if i put google dns on the openspot2.
The other device connected to the huawei hotspot work fine.
When i put the IP of the openspot2, i can't access to it.
The openspot2 always says internet unreachable ??
The other device connected to the huawei hotspot work fine.
When i put the IP of the openspot2, i can't access to it.
The openspot2 always says internet unreachable ??