Firmware v47 issues

Post Reply
Benny
Posts: 9
Joined: Tue Jul 02, 2019 8:31 pm
Location: JN29RX43vl

Firmware v47 issues

Post by Benny » Tue Jul 02, 2019 8:43 pm

Hi,
first issue : when searching for my callsign in 'ID database lookup' it doesn't find me : nor on my callsign ON5BGO, nor on my dmr-id 2069069
second issue : when connecting to a YSFreflector room, the last digit of my callsign is wrong : it take the number zero '0' instead of the letter 'O'. <-- corrected in the Quick-setup screen - sorry -
third issue : it takes the Device-ID as callsign...

see below the captured log in bold :

22:19:29 ysfref: received poll
22:19:30 ysfref: received poll
22:19:32 configarea: storing profile sector 0
22:19:32 net: connectors deinit
22:19:32 wiresxtracker: sending disconnect
22:19:32 ysfref: task terminating
22:19:32 net: init ysfref
22:19:32 ysfref: init
22:19:32 ysfref: init (callsign: ON5BG0 server: 51.255.193.63:42000 mode: c4fm)
22:19:32 ysfref: uninitialized
22:19:32 ysfref: initializing
22:19:32 ysfref: waiting for first pong
22:19:32 ysfref: got first pong, getting status
22:19:32 ysfref: connected
22:19:32 spk: starting voice announcement
22:19:32 ysfref: sending poll
22:19:32 ysfref: received poll
22:19:33 wiresxtracker: sending connect
22:19:33 spk: requesting remote play: OSCTYSRF0709050200
22:19:34 spk-remote: got first packet
22:19:34 nvmm-csd: looking up callsign *****D41D3/0
22:19:34 nvmm-csd: ignoring special callsign *****D41D3/0

22:19:34 ysfref: received poll


Thanks for your great work ! :)
Ben

User avatar
HA5OGR
Posts: 413
Joined: Sat Mar 26, 2016 7:32 pm
Location: Dunavarsány
Contact:

Re: Firmware v47 issues

Post by HA5OGR » Wed Jul 03, 2019 5:42 am

Hi Benjamin,
You are registered a DMR ID on June 24, 2019. I think this registration is very new and the Openpot ID database has not been updated yet so your callsign could not be found. Secondly: Your callsign is fine on YSF reflector, last letter is 'O' not the number zero. Thirdly: Looking up your callsign showed ON5BGO and "callsign not found" status at my Openspot.
Attachments
ON5BGO YSF dashboard.jpg
ON5BGO look up callsign.jpg
ON5BGO DMR registration date.jpg
73 de Lajos
Openspot alpha tester
Image

Benny
Posts: 9
Joined: Tue Jul 02, 2019 8:31 pm
Location: JN29RX43vl

Re: Firmware v47 issues

Post by Benny » Wed Jul 03, 2019 2:49 pm

Ok, i'll try it again this evening & tell you the next... :-)

Benny

User avatar
HA5OGR
Posts: 413
Joined: Sat Mar 26, 2016 7:32 pm
Location: Dunavarsány
Contact:

Re: Firmware v47 issues

Post by HA5OGR » Tue Jul 09, 2019 4:19 am

Openspot database have been updated.
Attachments
ON5BGO call sign lookup.jpg
73 de Lajos
Openspot alpha tester
Image

Benny
Posts: 9
Joined: Tue Jul 02, 2019 8:31 pm
Location: JN29RX43vl

Re: Firmware v47 issues

Post by Benny » Tue Jul 09, 2019 9:10 pm

Hi,
all is fine, right ! thanks Lajos ! :)

But in the ID-lookup, why other fields are empty ?

Benny

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4346
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Firmware v47 issues

Post by HA2NON » Wed Jul 10, 2019 7:01 am

We only handle ID, callsign and country because of GDPR reasons.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Post Reply