Sharklink

Post Reply
Lurive
Posts: 19
Joined: Thu Feb 06, 2020 11:23 am

Sharklink

Post by Lurive »

regards. The sharklink constantly restarts, although this one with a good connection.

At another point, the OP2 constantly loses connection even if it is close to the access point, turns on the blue LED constantly or the green one with yellow. After a while the green LED turns on and then returns to the cycle with the blue LED. OP2 is always close to the access point. I appreciate your help. Thank you.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5023
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Sharklink

Post by HA2NON »

Make sure the Wi-Fi bandwith is set to max. 20Mhz in the Wi-Fi router (see explanation here: https://superuser.com/questions/542191/ ... less-speed).
If it still does not work, try switching Wi-Fi channel on your Wi-Fi router. Only channels 1, 6 or 11 should be used (see explanation here: https://www.metageek.com/training/resou ... -6-11.html).
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Lurive
Posts: 19
Joined: Thu Feb 06, 2020 11:23 am

Re: Sharklink

Post by Lurive »

Thank you. What you tell me is when I'm with the wifi in my house, but the same happens to me when I connect OP2 to mobile data even when they have high speed. In this case what should I do?
73 !!

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5023
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Sharklink

Post by HA2NON »

Make sure your OS2 is running the latest stable (v63) or beta firmware version.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Lurive
Posts: 19
Joined: Thu Feb 06, 2020 11:23 am

Re: Sharklink

Post by Lurive »

If you have the latest version installed.

Post Reply