OpenSpot3 operating information:
Unable to talk on SharkRF Client NXDN OpenSpot3 to C4FM OpenSpot2. No reaction on OpenSpot3.
Test between 2 x OpenSpot2 one in C4FM and the other in NXDN via SharkRF Client. It works.
2 posts • Page 1 of 1
If the green status LED does not blink when you press PTT on your NXDN radio, then make sure you've ran NXDN AutoCal, or manually adjust the RX offset in +-50Hz steps on the Modem page.
Norbert Varga, HA2NON