Page 1 of 1

wifi home problem with op3

Posted: Mon Mar 23, 2020 2:40 pm
by EA5GTX
Good, my problem is that it connects my op3 with the wifi of the phone and with the router at home, it is not a Huawei EG8145V5. What is the problem ,. I use channel 1. Greetings. Victor EA5GTX

Re: wifi home problem with op3

Posted: Mon Mar 23, 2020 8:27 pm
by HA2NON
What LED color do you see on the device when you set it up for the home network?

Re: wifi home problem with op3

Posted: Tue Mar 24, 2020 8:04 pm
by EA5GTX
Good again, let's see what happens is that it connects (GREEN) and after 10 seconds it is disconnected and the red / blue LEDs blink and it always stays that way. I see that it is on the network with an ip but I cannot enter its website, Greetings and thanks. Victor . EA5GTX

Re: wifi home problem with op3

Posted: Wed Mar 25, 2020 8:38 am
by HA2NON
Red/blue LED indicate that the OS3 is connected to your Wi-Fi network, but it can't reach the internet: http://manuals.sharkrf.com/openspot3/en/led-states.html
First please make sure the OS3 is placed close to the Wi-Fi router. Can you open the web interface using sharkrf.link?

Re: wifi home problem with op3

Posted: Wed Mar 25, 2020 11:39 am
by EA5GTX
Do not . It cannot find the web, but as I have said before, it is in the list of those connected to Wi-Fi, with the ip 192.168.18.10. Sure on my network. I think it may be something from dns. The same thing happens to me with a roumba cleaning machine, it connects and then disconnects, the other devices are fine tv, telephone ... etc

Greetings . Victor. EA5GTX

Re: wifi home problem with op3

Posted: Wed Mar 25, 2020 2:07 pm
by HA2NON
You can try enabling DNS server override on the Network page.

Re: wifi home problem with op3

Posted: Thu Mar 26, 2020 4:57 pm
by EA5GTX
Good, in the end it has connected, it seems that if it goes, it is difficult to connect but after several minutes it connected. I have updated it to v.17. Thank you very much and regards. Victor. EA5GTX