Changing profiles

Post Reply
Regess
Posts: 2
Joined: Wed Mar 14, 2018 10:32 pm

Changing profiles

Post by Regess » Thu Mar 15, 2018 6:21 am

Just really getting to know my OPENSPOT, does anyone know how to change profiles from the HT? I normally run it on fusion. Thanks all.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4356
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Changing profiles

Post by HA2NON » Thu Mar 15, 2018 1:10 pm

Please take a look at the Config profile settings section in the user manual:

Enter the Special command DTMF code (by default it’s *) followed by the profile query/change DTMF code (by default it’s A) followed by the new profile number. Example: *A4
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

ve3nytoronto
Posts: 35
Joined: Fri Dec 23, 2016 3:15 am

Re: Changing profiles

Post by ve3nytoronto » Sun Mar 18, 2018 4:16 am

Hello Norbert,

I use 9000X (X=0 thru 4) with my DMR & DStar radios. How does this relate to *A4?

Tom VE3NY

ve3nytoronto
Posts: 35
Joined: Fri Dec 23, 2016 3:15 am

Re: Changing profiles

Post by ve3nytoronto » Sun Mar 18, 2018 2:00 pm

I am interested to know how others are using profiles. I have DMR and DStar radios. So, I have set up profiles :

O - Brandmeister
1 - Fusion bridge
2 - DStar
3 - XLX
4 - DMR+

Other ideas?

Tom VE3NY

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4356
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Changing profiles

Post by HA2NON » Mon Mar 19, 2018 6:21 am

*A4 is the DTMF code for C4FM modem mode / Fusion radios to switch to profile 4.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

VE3WCZ
Posts: 11
Joined: Sun Nov 11, 2018 12:32 am

Re: Changing profiles

Post by VE3WCZ » Thu Nov 15, 2018 2:12 am

ve3nytoronto wrote:
Sun Mar 18, 2018 2:00 pm
I am interested to know how others are using profiles. I have DMR and DStar radios. So, I have set up profiles :

O - Brandmeister
1 - Fusion bridge
2 - DStar
3 - XLX
4 - DMR+

Other ideas?

Tom VE3NY
I set mine up with the following

0 - REF & XRF reflectors
1 - DCS & XLX reflectors

I plan to set up 2 for use in connecting to gateways.

I only use my openspot for D-star at the moment and I've found the ability to switch profiles directly from the radio very helpful.

VE3WCZ
73's

Post Reply