Hardware Version v1.1 (433 ��)

Post Reply
ve3nytoronto
Posts: 35
Joined: Fri Dec 23, 2016 3:15 am

Hardware Version v1.1 (433 ��)

Post by ve3nytoronto »

All,

I am configuring an Openspot for a friend who acquired his device a few years ago and has been procrastinating setting it up. I have volunteered to move him forward and note that his hardware version is indicated as "v1.1 (433 ��)" ... what do the ? ? mean?? Seems to be working ok with current firmware but wondered if there is something else I should be do.

tnx ... Tom VE3NY

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4701
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Hardware Version v1.1 (433 ��)

Post by HA2NON »

Please set the country of operation on the Settings page.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

ve3nytoronto
Posts: 35
Joined: Fri Dec 23, 2016 3:15 am

Re: Hardware Version v1.1 (433 ��)

Post by ve3nytoronto »

Did that ... still showing as ?? Any other advice? device seems to be working fine otherwise.

tnx Tom VE3NY

DO1IP
Posts: 20
Joined: Sat Mar 24, 2018 3:07 pm
Location: JO31PC
Contact:

Re: Hardware Version v1.1 (433 ��)

Post by DO1IP »

simply ignore that!
73s, de DO1IP
Openspot2 (v63)

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4701
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Hardware Version v1.1 (433 ��)

Post by HA2NON »

Which firmware version do you use? Make sure it's the latest (139)
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

ve3nytoronto
Posts: 35
Joined: Fri Dec 23, 2016 3:15 am

Re: Hardware Version v1.1 (433 ��)

Post by ve3nytoronto »

Most current version is installed (was 42 or 49 when I got device and went straight to139).

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4701
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Hardware Version v1.1 (433 ��)

Post by HA2NON »

Please send your exported config profile file to info@sharkrf.com (please refer to this forum thread)
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Post Reply