Can I get instructions on how to connect my Icom radios using the original openSpot to a repeater rather than a reflector. I tried using the same procedure but it keeps disconnecting my internet connection and I have to reboot the openSpot.
3 posts • Page 1 of 1
If you want to use a gateway, set the URCALL to the gateway’s callsign and remote module. Remote module should be the last character of the URCALL. Make sure you have registered your local module on the D-STAR gateway registration system. If you have a registration, you have probably registered the “space” local module, in this case set your openSPOT’s local module to a space (empty) character.
Norbert Varga, HA2NON