High speed network burst

Post Reply
dgmaley
Posts: 13
Joined: Tue Mar 27, 2018 3:45 am

High speed network burst

Post by dgmaley » Tue Apr 23, 2019 1:43 am

Good evening from Iowa, USA.
Have noticed that the network will occasionally buffer a small amount of incoming UTP traffic and then send it to me in a short burst of 30 to 40Mb.
Wondering if there might be an upper limit on the original openspot on how fast it would accept incoming voice traffic?
Thank you.
Dave...

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4257
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: High speed network burst

Post by HA2NON » Tue Apr 23, 2019 6:05 am

We have not measured the upper limit for the device.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

dgmaley
Posts: 13
Joined: Tue Mar 27, 2018 3:45 am

Re: High speed network burst

Post by dgmaley » Mon Apr 29, 2019 7:21 pm

Well, I found the real problem that was slowing this unit down.
Somehow the firmware had become corrupted. It was still working, but had slowed down. It became progressively worse and was displaying random intermittent errors.
I reset configuration several times to no avail.
Ended up reflashing it twice (ver 141) and it seems to be alright now.

Checking to see if you have heard of this before and what I might be doing to cause it?

Thank you in advance.

Dave.

Post Reply