Page 1 of 1

Reflector linking

Posted: Fri Oct 18, 2019 12:10 pm
by N1UB
Can I use my Openspot 1 as a way to link my Wires-X room to one of the reflectors such as YSF so my friends with hotspots can access my room ? Thank you

Re: Reflector linking

Posted: Sat Oct 19, 2019 7:36 am
by HA2NON
Yes, if you set up a Yaesu transceiver for the Wires-X room and set your openSPOT's RX/TX frequencies to the transceiver's frequency, as the openSPOT does not support directly connecting to the proprietary Wires-X network.

Re: Reflector linking

Posted: Sat Oct 19, 2019 12:46 pm
by N1UB
Thanks for the reply. What is the process to get it to show up on the list of the YSF reflector?

Re: Reflector linking

Posted: Mon Oct 21, 2019 7:57 am
by HA2NON
You have to register your YSFReflector here: https://register.ysfreflector.de

Re: Reflector linking

Posted: Thu Oct 24, 2019 12:43 am
by N1UB
Seem to have it working, the audio at times seems a little distorted. Is there any adjustments I can do to the Openspot to improve the audio quality ?

Re: Reflector linking

Posted: Thu Oct 24, 2019 7:54 am
by HA2NON
If the remote station is coming from a DMR network, then the audio can be distorted (several YSFReflector servers are linked to DMR talkgroups).

Check if the Dejitter queue graph shows any invalid seqnum errors on the Status page.

Re: Reflector linking

Posted: Sat Oct 26, 2019 10:08 am
by N1UB
He is not coming through a DMR network, Fusion radio to zumspot to FCS reflector.

The Dejitter queue graph does show some red spikes in it.