Cross mode DMR - YSF Reflector

Post Reply
Posts: 37
Joined: Sat Nov 11, 2017 9:10 pm

Cross mode DMR - YSF Reflector

Post by PA3BZT »

I am using the OpenSpot in cross mode using a Tytera MD390 DMR handheld and the Connector set as YSF Reflector. The communication works fine but has a annoying side effect.
When in contact with a Yaesu user and this user releases the PTT button, a distorted noise signal is heard on my radio and the Status page shows an additional line with To "ALL" and the call sign in From.
Today I checked with another amateur using the same DMR radio and cross mode Connector setting, than this effect does not showup.
It appears the noise and additional line in Status page only occurs with Yaesu users.

How can I solve this problem?

Fred, PA3BZT

User avatar
SharkRF team
SharkRF team
Posts: 4701
Joined: Fri Mar 25, 2016 3:33 pm

Re: Cross mode DMR - YSF Reflector

Post by HA2NON »

Have you tried using another DMR radio or another server?
Make sure you use the latest openSPOT firmware (v138), and TX power set to 100%.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Post Reply