Cannot connect

Post Reply
bohica
Posts: 2
Joined: Tue May 21, 2019 12:28 pm

Cannot connect

Post by bohica »

My original open spot has been working flawlessly since I got it but now I can not connect.I get a flashing red all the time. I checked the router info page and it shows the open spot as an Ethernet device but it indicates the status is off.
I have tried to reset the OS, reset the router, tried different usb cables and Ethernet cables but it will not connect.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5023
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Cannot connect

Post by HA2NON »

Which LED is red? Is the ETH LED green?
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

bohica
Posts: 2
Joined: Tue May 21, 2019 12:28 pm

Re: Cannot connect

Post by bohica »

Status light flashing red
ACT light green pulsing slowly
ETH ACT green pulsing rapidly

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5023
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Cannot connect

Post by HA2NON »

Make sure openSPOT is connected to the same router your browser device is connected to with an Ethernet cable. If http://openspot.local/ does not work then please open the web interface by entering openSPOT's IP address in your browser. You can find openSPOT's IP address by looking at the DHCP client list in your router's web interface, or you can use an IP or MDNS scanner app.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Post Reply