Page 1 of 1

openSPOT1 DR-1X

Posted: Wed Jul 15, 2020 2:22 pm
by wa9vfd
My openSPOT1 is configured with the reverse TX/RX of our local DR-1X repeater.

When I key up the repeater with a radio the openSPOT hears nothing.

Is this due simply to signal strength or is there something in the C4FM packet that will never allow this to work?

I have tried Full/Half and A-B-C-D-E-F and Half Calibration which resulted in C. I have tried DN wide and DN narrow and VW on the radio. I don't have administrative access to the DR-1X.

Re: openSPOT1 DR-1X

Posted: Thu Jul 16, 2020 8:07 am
by HA2NON
Probably the OS1 does not receive the repeater well enough.

Re: openSPOT1 DR-1X

Posted: Thu Jul 16, 2020 1:01 pm
by wa9vfd
Thanks. I'll put together a tape measure yagi and see if that works.