TS2 TG DMRPlus options to the Homebrew connector

Post Reply
dj5kp
Posts: 5
Joined: Fri Apr 28, 2017 8:53 am

TS2 TG DMRPlus options to the Homebrew connector

Post by dj5kp » Sat Nov 10, 2018 1:05 pm

Hello,

will this feature although be implemented into openspot (1) ?

73 de Michael DJ5KP

User avatar
DO1IP
Posts: 16
Joined: Sat Mar 24, 2018 3:07 pm
Location: JO31PC
Contact:

Re: TS2 TG DMRPlus options to the Homebrew connector

Post by DO1IP » Tue Nov 20, 2018 4:25 am

den haben die überhaupt nicht im Fokus im Moment Michael ;-)
73s, de DO1IP
Openspot1 (v.141) 8-)

yo2loj
Posts: 19
Joined: Mon May 08, 2017 9:40 am

Re: TS2 TG DMRPlus options to the Homebrew connector

Post by yo2loj » Fri Nov 23, 2018 11:55 pm

You can set TG2 options by hand in the raw option string in the DMR/Homebrew/MMDVM Connector since IPSC2 supports MMDVM mode on port 55555:
- check MMDVM mode
- configure your server
- check Use DMRplus options
- edit the Raw options, e.g.
StartRef=4670;RelinkTime=;UserLink=1;TS1_1=226;TS2_1=2262;
- apply the settings

So basically we have the option, just not nicely in individually editable fields.

dj5kp
Posts: 5
Joined: Fri Apr 28, 2017 8:53 am

Re: TS2 TG DMRPlus options to the Homebrew connector

Post by dj5kp » Thu Dec 06, 2018 4:21 pm

Yes I know, that I can do it with the Raw options. But the input line ist not long enough (only 100 characters) and that is not enough, if you want to use the whole set of parameters.

e.g. I use at the moment:
StartRef=4045;UserLink=1;TS1_1=1;TS1_2=20;TS1_3=110;TS1_4=2;TS1_5=8;TS2_1=2623;TS2_2=2624;
than are only 9 characters left, therefore I didn't use RelinkTime=120, because thats to long.

It would be good to have 200 chars !

Post Reply