Yaesu DG-ID or DSQ

AB8DT
Posts: 19
Joined: Tue Oct 18, 2016 6:56 pm
Location: Cedar Springs, MI
Contact:

Yaesu DG-ID or DSQ

Post by AB8DT » Thu Oct 19, 2017 1:29 pm

Nobert,
Any plans on adding DSQ or DG-ID to TX on the open spot? I would like to bridge a DR-2X using IMRS but the OpenSpot will not trigger the repeater due to no DG-ID/DSQ comming from the OpenSpot.

Ron, AB8DT

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4257
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Yaesu DG-ID or DSQ

Post by HA2NON » Thu Oct 19, 2017 2:52 pm

openSPOT forwards the former DSQ field, and source/destination callsigns as they are, so the DG-ID is untouched.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

AB8DT
Posts: 19
Joined: Tue Oct 18, 2016 6:56 pm
Location: Cedar Springs, MI
Contact:

Re: Yaesu DG-ID or DSQ

Post by AB8DT » Thu Oct 19, 2017 3:30 pm

Bridging with the OpenSpot works great with FCS/YSF/DMR when the repeater is not linked into IMRS and DG-ID TX:00 RX:00 but that is not the issue. It is not that the DSQ is not "touched" but the OS needs to TX a DG-ID/DSQ code in order to be used with IMRS.

For instance: I have a DR-2X linked here in Michigan with two other repeaters in Texas on DG-ID 99 and I bridge an OS into YSF locally to the local DR-2X repeater pair. My TX will pass into the OS since it is locally and since the OS is "open" to DSQ but when RX via the OS goes to the repeater the RX will NOT pass due to no DG-ID TX:99. You cannot have DSQ set to "OFF" or DG-ID TX:00 RX:00 when linking in IMRS. You need to use a DSQ RX code in order to select the proper repeater group that is FPP in the DR-2X.


Ron, AB8DT

AB8DT
Posts: 19
Joined: Tue Oct 18, 2016 6:56 pm
Location: Cedar Springs, MI
Contact:

Re: Yaesu DG-ID or DSQ

Post by AB8DT » Fri Oct 20, 2017 6:28 pm

Norbert,
Were you able to follow what I was saying last?

Does the OS have the capability to add in a FW update to TX a DSQ code (00 thru 99) to provide the proper DG-ID? This will allow TX from FCS or YSF from an OS to tie into a DR-2X Fusion II repeater in bridge mode while on IMRS.

Ron, AB8DT

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4257
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Yaesu DG-ID or DSQ

Post by HA2NON » Sun Oct 22, 2017 2:53 pm

Adding new features of System Fusion is already in the TODO list.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

AB8DT
Posts: 19
Joined: Tue Oct 18, 2016 6:56 pm
Location: Cedar Springs, MI
Contact:

Re: Yaesu DG-ID or DSQ

Post by AB8DT » Mon Oct 23, 2017 1:26 am

Knew you guys would be on top of things! Keep up the good work with this fantastic product😁

User avatar
wb8sqj
Posts: 12
Joined: Mon Feb 27, 2017 7:22 pm

Re: Yaesu DG-ID or DSQ

Post by wb8sqj » Sat Mar 24, 2018 4:05 pm

When will the open-spot be able to transmit the DG-ID

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4257
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Yaesu DG-ID or DSQ

Post by HA2NON » Sun Mar 25, 2018 8:22 am

openSPOT is already transmitting the DGID.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

User avatar
wb8sqj
Posts: 12
Joined: Mon Feb 27, 2017 7:22 pm

Re: Yaesu DG-ID or DSQ

Post by wb8sqj » Sun Mar 25, 2018 11:59 am

it will pass the DG-ID but we need it to insert the DG-ID when used for linking repeaters.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4257
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Yaesu DG-ID or DSQ

Post by HA2NON » Mon Mar 26, 2018 5:46 am

You can set the SQL code override in the openSPOT which is basically the same as the DG-ID.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Post Reply