Help with Anytone AT-D868UV

Post Reply
W3PMH
Posts: 1
Joined: Fri Feb 08, 2019 1:14 pm

Help with Anytone AT-D868UV

Post by W3PMH »

Can anyone help me with an initial setup or a code plug for my Anytone AT-D868UV Radio?
My home is in the shadow of my local DMR repeater so I purchased a Shark Openspot 2. I can't figure how to setup the Radio (frequency etc.) to connect to the Openspot.
My local repeater is 443.050/448.050 Pl 167.4 Color 1 Slots 1 & 2.
Full code plug with all the extras would be greatly appreciated as this radio has the capacity to accept.

Thanks,
Paul W3PMH

DH2ID
Posts: 9
Joined: Sun Jan 06, 2019 9:36 pm

Re: Help with Anytone AT-D868UV

Post by DH2ID »

Hi Paul,
on this page: http://www.miklor.com/DMR/DMR-CodePlugs.php
there is a CP for the Harrisburg/York PA area. maybe that one helps :-)
This CP also has a frequency set at 434 MHz for the openspot.
You can easily change that with the CPS software you'll find here:
http://www.wouxun.us/category.php?category_id=90
With the CPS you can program your call and ID.
Vy 73, Alex - DH2ID

Post Reply