Wire X button - crossband from C4FM to DMR

Post Reply
ct1euw
Posts: 12
Joined: Tue May 21, 2019 2:04 am

Wire X button - crossband from C4FM to DMR

Post by ct1euw » Wed Jun 26, 2019 3:16 am

On the radio when I press the Wirex button I see all five profiles of the openspot, it is possible to show the same information programmed in the "Quick Call" buttons so we can easily connect to one of these programmed TGs using the radio.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4080
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Wire X button - crossband from C4FM to DMR

Post by HA2NON » Wed Jun 26, 2019 6:45 am

If you mean quick configuration profile switch, then you can do it at the bottom left of the web interface, or on the Settings page.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

ct1euw
Posts: 12
Joined: Tue May 21, 2019 2:04 am

Re: Wire X button - crossband from C4FM to DMR

Post by ct1euw » Wed Jun 26, 2019 1:25 pm

I did not explain myself well. What I wanted to say was if it is possible to see on the radio the links programmed in the quick call buttons, identical as you see the profiles, so you could make the calls on the radio itself with just a touch.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4080
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Wire X button - crossband from C4FM to DMR

Post by HA2NON » Wed Jun 26, 2019 2:48 pm

You can save the servers you want to use into categories on your radio to quickly access them. This is a Yaesu transceiver feature.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

ct1euw
Posts: 12
Joined: Tue May 21, 2019 2:04 am

Re: Wire X button - crossband from C4FM to DMR

Post by ct1euw » Thu Jun 27, 2019 10:50 am

In my case I use the FTM-400 without any problems (changing to any TG in crossband C4FM to DMR), but if I want to use the FT-991 I can not change for example to the TG 268303 using the FT991 radio, so if it were possible, it would be useful to be able to access the radio on the pre-programmed information on the quick call buttons using the wire-x key. However it will be a radio limitation or ignorance on my part of how to do it on FT991. Thanks for your attention. 73's

Post Reply