D-Star / DMR on Shark Openspot1

Post Reply
zs6eli
Posts: 2
Joined: Thu May 19, 2022 11:54 am

D-Star / DMR on Shark Openspot1

Post by zs6eli »

Hi, I recently purchased an Icom ID-31E. I currently use my TYT MD380 with my Openspot 1. What do I need to do to use both on the same Openspot, is that possible? I want to be able to talk on D-star and other times with the TYT on DMR.
73
Evan
ZS6ELI
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 6548
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: D-Star / DMR on Shark Openspot1

Post by HA2NON »

Yes, it's possible. For D-STAR, activate a D-STAR connector (ex. REF/XRF or DCS/XLX). For DMR, activate a DMR (or C4FM if you want to cross mode) connector.
Norbert Varga, HA2NON
SharkRF Team
zs6eli
Posts: 2
Joined: Thu May 19, 2022 11:54 am

Re: D-Star / DMR on Shark Openspot1

Post by zs6eli »

Hi Norbet

So I got my Openspot 1 to work with D-star and still have the DMR setting programmed into the Openspot.

If I wanna do some DMR do i need to enter the interface and change and edit the connector etc?

Thanks
Evan
ZS6ELI
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 6548
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: D-Star / DMR on Shark Openspot1

Post by HA2NON »

You can use the web interface, or set up 2 configuration profiles, one for DMR and one for D-STAR, and you can switch between these 2 configuration profiles using your transceiver.
Norbert Varga, HA2NON
SharkRF Team
Post Reply